Smoke pipes

Home » Smoke pipes

Skamet OÜ manufactures smoke pipes in various diameter and size. In addition to straight pipes we make elbows and gate valves for stoves and fireplaces. Walls of standard products are 1.2 mm thick. Products from thicker material are available on request. All pipes are made from ferrous metal. We offer a range of decorative plates and nets for flues that can be installed around smoke pipes.

Straight pipes  

Straight pipes diameter is shown as inner size. One end of every straight pipe features a collar (collar outer diameter is the same as inner diameter at the opposite end) for connection of pipes with each other.

All sizes are given in manuals

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» 200 – 1000 mm long;
» 1.2 mm thick
» different diameters;
» stainless steel;
» we also produce longer welded pipes;
» pipes can be also produced from thicker metal.

 

Smoke pipe elbows

Diameter indicated on smoke pipe elbow is its inner size. Elbows have no collars, i.e. the inner diameter is the same at both ends. Flap or gate valves can be installed inside elbow. In addition, cleanouts can be installed on smoke pipe elbows – fixed with screws. Elbows can be also joined with each other using collars – see below.
All sizes are given in manuals

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» length is measured from elbow exit (from 300 mm to 1000 mm);
» angle of elbow  90˚ and 135˚ degrees;
» 1.2 mm thick
» different diameters;
» stainless steel;
» we can also produce longer or shorter elbows;
» bend angles can be changed;
» pipes can be also produced from thicker metal.

Dampers

Indicated smoke pipe diameter shows the inner size of damper. One end of flap damper features a collar (outer collar diameter is the same as the inner diameter at the opposite end). Sliding gate has inner diameter at one side corresponding to outer diameter at the opposite side. Dampers of both types can be joined to other pipes.
All sizes are given in manuals

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» length of sliding gates is 80 mm and flap gates – 300 mm;
» 1.2 mm thick
» different diameters;
» stainless steel;
» we can also produce longer or shorter;
» pipes can be also produced from thicker metal.

 

Collars

Smoke pipe collar diameter is shown as external dimension. Collars are meant for joining smoke pipe elbows, and, if necessary, dampers and staright pipes too. Collar length is 80 mm. As pipes are joined so that both collar ends are inserted into other pipes, the whole structure may become 10-20 mm longer. The product range includes collars in various sizes: from 103 mm to 200 mm.
All sizes are given in manuals

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» 80 mm long;
» 1.2 mm thick
» different diameters;
» stainless steel;
» we can also produce longer or shorter;
» pipes can be also produced from thicker metal.

Chimney caps 

Chimney cap diameter shows its external dimension. Caps prevent rainfall from getting into chimney and stove. The product range includes caps in various sizes: from 103 mm to 200 mm. 

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» 1.2 mm thick
» different diameters;
» stainless steel;
» pipes can be also produced from thicker metal.

 

Smoke pipe adapters

Smoke pipe adapters are meant to connect or resume two different smoke pipes with different diameters. The first number of adapter is outer diameter and the second number is inner diameter. Eg: 115(outer) → 150(inner)

Standard product parameters: Additional оptions:
» diameter 103 – 200 mm;
» material – ferrous metal;
» 1.2 mm thick;» 200 mm long.
» Different diameters;
» stainless steel;
» thicker metal;» different lengths.

Beauty slat around smokepipe

Options:

»  made from black metal;
»  beauty slats for smokepipes 115 mm and 120 mm is made from pressed metal (with edge), for other sizes it is trimmed (flat);
»  edge is 50 mm wide (wider edge on request);
»  rectangular strip on request;
»  Ordering codes (IL-115; IL-120)

Share Button